SWITCH FOR LED LIGHTS:
Turn the switch towards those LED lights.Normally all lights would go after the power is connected. lf you do not wantall LED lights, please turn the switch back.
Please plug in the output of power adapter here. DO NOT use adapter from elsewhere. Using power adapter without our company's tests or certification might cause damages to the host or other devices. On that occasion, the user must take corresponding responsibility by himself.
All DC9V power output, with the maximum capacity of
100mA, are suitable for ordinary analog effectors. Under the circumstances of all LED lights on, instantaneous overcurrent in certain output would lead to the corresponding LED light's flash and the currents of this channel limit to 100mA.That is to say, output 1-6 might not be able to work properly if theconnected digital effectors are of larger power consumption, then you needto use output 7 or 8.
Also DC9v power output with the maximum volume of 500mA is suitable for digital effectors and DC9V low-power digital guitar amplifiers.When instantaneous overcurrent occurs in this channel, the corresponding LED light would be flashing and the currents limit to 500mA.